Sdec-3500 - JBL Synthesis SDEC-3500 Operation Manual

JBL SYNTHESIS SDEC-3500
INPuT/OuTPuT ASSIGNMENTS
SDEC-3500 ANALOG CONNECTIONS
The SDEC-3500 supports up to 7.1 input with up to 7.1 output. The input and output
assignments are described in the table below. You must make the correct connections from the
surround processor output to the amplifier input for the system to work correctly.
The correct Synthesis Interconnect kit includes all the necessary connections for using the SDEC
in the Synthesis system.
CONNECTION NOTES
• Please follow the Input/Output Assignments table for correct connections.
• You will need to use the Ethernet network port on the rear panel of the unit for the final
calibration process. You can connect the SDEC-3500 through any standard Ethernet hub.
SDEC3500 BLU LINK CHANNELS
The SDEC3500 may output digital audio via the BLU-Link output connector including 4 discrete
subwoofer channels.
SDEC-3500 INPUT/OUTPUT ASSIGNMENTS
Surround Processor to SDEC-3500 Inputs
Number
1
2
3
4
5
6
7
8
SDEC-3500 Outputs to Amplifiers
Number
9
10
11
12
13
14
15
16
Input/Output Assignments
Channel

SDEC-3500

Left Front A1
Right Front A2
Center Front A3
Left Side A4
Right Side B1
Left Rear B2
Right Rear B3
Subwoofer B4
Channel SDEC-3500
Left Front C1
Right Front C2
Center C3
Left Side C4
Right Side D1
Left Rear D2
Right Rear D3
Subwoofer D4
5
- -