Sony PCS-TL30 Quick Start Manual page 24

a Tally lamp
Lights up when local video is being sent to the remote
system.
b Camera lens
c Lever for camera lens cover
d Microphone
e
(Volume) buttons
Serve to adjust the volume.
+: Increases the volume level.
-: Decreases the volume level.
f
(Phones) jack (stereo mini jack)
Lets you connect a pair of headphones (commercially
available).
g
(Mic) jack (mini jack)
Allows connection of the optional microphone PCS-A1 or
PCSA-A3.
h Speakers
i Online lamp
Shows mainly the incoming/outgoing call status.
j
Mic Off button and indicator
Lets you suppress the sound from the local system. Press
the button again to resume sending the sound to the remote
system.
k
(Videoconference) button and indicator
Serves for switching from computer screen to
videoconference screen.
l
(PC) button and indicator
Serves for switching to computer screen.
m
(Menu) button
Press to bring up the Setup menu.
n
(Power) switch and indicator
Turns power to the system on and off.
When using the system as a computer screen in PC mode,
pressing the switch once turns the power off.
When using the system in VC mode, pressing the switch
once sets the system to standby mode. To turn the power
off in VC mode, press the switch again within 5 seconds of
the first press.
Note
The power switch does not function during a
communication session.
24
Names and Functions of Parts
o
"Memory Stick" indicator
Shows the status of the "Memory Stick" slot.
Note
Do not remove the "Memory Stick" when this indicator is
lit.
Rear view
a Rear cover
Removing this cover gives access to the connector panel.
The connecting section between the stand and the display
is also located behind the panel. You can adjust the height
of the display by changing the screw positions.
Right side view
a "Memory Stick" slot
A "Memory Stick" can be inserted here.
1
1