Ford 2016 MUSTANG Owner's Manual page 189

E176084
5. The vehicle jacking points are shown
here, and can be identified by the
triangle markings on the vehicle. Details
are depicted on the warning label on
the jack.
E174939
6. Place the jack at the jacking point next
to the tire you are changing. Turn the
jack handle clockwise until the wheel
is completely off the ground.
7. Remove the lug nuts with the lug
wrench.
Mustang (CZG) Australia, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enAUS, Edition date: 01/2016, Third Printing
Wheels and Tires
8. Replace the flat tire with the spare tire,
9. Lower the wheel by turning the jack
E75442
10.
11.
185
making sure the valve stem is facing
outward. Reinstall lug nuts until the
wheel is snug against the hub. Do not
fully tighten the lug nuts until the wheel
has been lowered. If you are using the
temporary tire, the lug nut washers will
not appear to be flush with the rim.
This is normal only when using the
temporary spare tire.
handle counterclockwise.
1
3
5
Remove the jack and fully tighten the
lug nuts in the order shown. See
Technical Specifications (page
187).
To store the folded wrench on the
jack, engage the bracket of the jack
base on the wrench feature as shown.
Swing the wrench upwards and
adjust the height of the jack until the
pin engages the hole. Tighten the hex
nut clockwise by hand until secure.
4
2