USING MYKEY WITH REMOTE
START SYSTEMS
MyKey is not compatible with non
MYKEY TROUBLESHOOTING
Condition
I cannot create a MyKey.
I cannot program the configurable
settings.
I cannot clear the MyKeys.
I lost the only admin key.
I lost a key.
MyKey distances do not accumulate.
No MyKey functions with the keyless
entry transmitter.
Mustang (CZG) Australia, Vehicles Built From: 13-07-2015 Vehicles Built Up To: 01-05-2016, enAUS, Edition date: 01/2016, Third Printing
MyKey
Ford-approved, aftermarket remote start
systems. If you choose to install a remote
start system, see an authorized dealer for
a Ford-approved remote start system.
Potential Causes
•
The key or transmitter used to start the
vehicle does not have admin privileges.
•
The key or transmitter used to start the
vehicle is the only admin key (there always
has to be at least one admin key).
•
Vehicles with keyless start: The keyless
start transmitter is not placed in the backup
position. See Starting and Stopping the
Engine (page 96).
•
SecuriLock passive anti-theft system is
disabled.
•
The key or transmitter used to start your
vehicle does not have admin privileges.
•
No MyKeys are created. See Creating a
MyKey (page 35).
•
The key or transmitter used to start your
vehicle does not have admin privileges.
•
No MyKeys are created. See Creating a
MyKey (page 35).
Purchase a new key from an authorized dealer.
Contact an authorized dealer.
•
The MyKey user is not using the MyKey.
•
An admin key holder cleared the MyKeys
and created new MyKeys.
•
The key system has been reset.
•
An admin transmitter is present at vehicle
start.
•
No MyKeys are created. See Creating a
MyKey (page 35).
38