Phone Book - Skoda Amundsen Owner's Manual

You can select the following functions:
Delete the digit

Dial the entered number
1)

Add a prefix if this option has been set in the telephone set-
 2)
tings » page 35
Entering a number using the voice control

 Mailbox Select mailbox if its number is entered in the phone set-
tings » page 35 or enter the number directly
The input screen also functions as an alphanumeric keypad that you can use to
search for contacts in the phonebook.
For example, if you enter 32, the unit will display contacts with the letter se-
quence DA, FA, EB, etc.
Select the desired contact by pressing the corresponding function key.

Phone book

›
Press  the button.
The device phone book has up to 2000 free memory locations for imported
phone contacts. Each contact can contain up to 5 telephone numbers.
The phone book can also be called during an ongoing call.
After successful pairing, the contacts are imported
Loading the directory
Upon first connection of the mobile phone with the device, the system begins
to download the phone book from the phone and from the SIM card
device memory . Depending on the number of contacts this may take several
3)
minutes to complete.
1)
If not number is entered, the last dialled number
2) If the add-prefix option is switched on but the prefix is not entered in the phone settings, the last dialled
number will be displayed in the input field after you press the symbol button.  or the last number dial-
led. If the prefix defined and a number is entered in the input line, press the symbol key to  the prefix is
added in front of telephone number and connection starts.
3)
In some phones you need to confirm import of contacts to the device.
4) Some mobile phones do not support downloading of contacts from the SIM card.
5)
This function is only supported by some mobile phones.
40
Phone
» page 13
.
3)
into the
4)
will be displayed after you press the symbol key.

If the phonebook downloaded from the mobile phone contains more than
2000 contacts, loading is stopped and the message Contacts not completely
imported. appears on the screen. Only contacts that have already loaded are
available and these are in the menu .
The first 200 contacts along with the contact data, including the picture asso-
ciated with the contact, are downloaded to the device memory
If an error occurs while loading the phone book, the message Import failed.
Please try again and check whether the BT device ... allows connections.
Update phonebook
Each time the mobile phone has established a new connection with the device,
the relevant phonebook will be updated.
During the update, the phone book which was stored after the last completed
update will be available. Newly stored telephone numbers are only shown af-
ter the updating has ended.
The update can be performed manually
Find contact
Press the button Find to open the input screen with keypad to search in the
phonebook » page 8.
Select contact
Press the function key with one of the displayed contacts to start dialing.
Where a contact contains several telephone numbers, the system displays a
menu containing the telephone numbers for the contact.
Contact details
Press the function key with the symbol  the contact details are displayed.
Press the function key with the indicated phone numbers to start dialing.
Press the function key with the symbol  and the contact will start the route
guidance.
.
5)
» page 35 Import contacts.