Table of Contents
Advertisement
Operating the Printer
Once the printer has been setup, there is very little that you
need to do during daily operation because most functions are
controlled by the host system. This chapter describes the
following few tasks that you will need to perform, some more
often than others:
•
Operating the keypad
•
Cleaning the printer
•
Cleaning the thermal printhead
For instructions on changing the paper, see "Loading and
Removing Paper".
Operating the Keypad
The keypad contains one button and one status LED for easy
operation of the printer.
Status LED
There is a single status LED to display on-line and error
conditions. The following table describes the types of error
conditions possible and patterns that the LED will flash in those
conditions.
16
80p3gb.p65
16
In order of precedence:
Printer not configured
thermal head overheat
Cutter error
Cover open
Paper out
Buttons
The printer includes one button that has the following function:
FEED Button
The FEED button advances receipt paper.
Cleaning the Printer
Cleaning the printer occasionally and keeping it well maintained
will help it to last longer and run better.
Do not use rubbing alcohol or any kind of cleaner on any
internal parts of the printer, as some parts may crack or
break as a result.
12/01/99, 11:43
5 quick flashes
Rapid, continuous
3 quick flashes
Continuous
Slow, continuous
OKIPOS 80 Plus III
Advertisement
Table of Contents
