Lenovo TAB 2 A10-30 Hardware Maintenance Manual
1050 Vibrator motor
For access, detach the following FRUs:
• Rear cover assembly (see Step 1 on page 35 to Step 2 on page 35 in "1010 Rear
• Battery FPC (see Step 1 on page 37 to Step 3 on page 38 in "1020 Battery
1. Desolder the wires of the vibrator motor from their connecting points on the
2. Remove the vibrator motor as shown in the figure below.
44
cover and side key")
pack")
main board at the position shown in the figure below.
Figure 5-1. Position for desoldering the wires of the vibrator motor
Figure 5-2. Removing the vibrator motor