1040 Vibrator Motor - Lenovo B8080 Maintenance Manual

Lenovo B8080 Hardware Maintenance Manual

1040 Vibrator motor

For access, remove the following FRU:
• "1010 Rear cover" on page 28
1. Disconnect the power supply to the tablet by detaching the battery FPC from
2. Desolder the wires of the vibrator motor from the sub board at the position
42
its connector on the main board using a guitar pick.
Figure 4-1. Disconnecting the power supply of the tablet
shown in the figure below.
Figure 4-2. Position for desoldering the wires of the vibrator motor