Oki ML1120 User Manual page 27

5. Pull the lock levers on the sprocket wheels forward and open the
sprocket covers.
6. Adjust the wheels so the sprockets align with the holes in the
continuous forms you are using.
F4-36.jpg
7. Close the sprocket covers and push the levers back to lock the sprocket
wheels in position.
8. Replace the paper separator.
9. Turn the printer on.
10. Press the Load/Eject button. The paper advances to the print position.
Do not use the platen knob to adjust the paper.
F4-35.jpg
Microline 1120 User's Guide
27