When installing:
Plug the orange cable into the connector marked MAIN on the card; and plug the blue cable into the
connector marked AUX on the card.
1070 Memory module
For access, remove these FRUs:
•
"1010 External battery pack" on page 60
•
"1020 Big door" on page 61
Removal steps of the memory module
When installing:
Insert the notched end of the memory module into the memory slot at an angle of about 20 degrees. Press
the memory module in firmly, and pivot it downward until it snaps into place. Ensure that the memory
module is firmly installed in the slot and does not move easily.
1080 Coin-cell battery
For access, remove these FRUs:
•
"1010 External battery pack" on page 60
3
1
1
1
.
Chapter 9
Removing or replacing a FRU
67