Oki LED Printer User Manual page 29

To reduce paper jams:
Do not fill tray above Paper Full mark.
Use only recommended paper weight
- Tray: 16 to 28 lb. (60 to 105 g/m
- Manual feed: 16 to 32 lb (60 to 120.5 g/m
Do not open the cover, or remove the paper tray
during a print job.
Do not switch paper exit paths while printing.
Use paper that is smooth and of high quality.
Store paper in its ream wrapper until you are ready
to use it, and keep it away from moisture or other
conditions that can cause it to wrinkle or curl.
Avoid printing on both sides of the paper for more
than a few pages, or preprinted documents that
have been in a photocopier.
Try paper before you buy in quantity.
If a paper jam message displays, remove the jam using
the instructions that follow.
TRAY "n" INPUT JAM
!
1 Slide the paper tray out of the printer.
2 )
2 )
2 Remove the sheet that did not feed.
E-29
"n" indicates the trayn umber in which the jam
occurred (standard configuration is tray 1).