LENCO CRW-1 User Manual page 8

TIME SET
ALARM SET
SNOOZE
SLEEP
ALARM ON/OFF
MIN
HOUR
Unpacking
DANGER to children-Fatal risk of suffocation/ Choking
• Keep children away from packing material.
Dispose of it immediately.
△ Take all parts out of their packaging and make sure they are not damaged.
Inserting back-up batteries
The back-up batteries ensure that the set time and alarm time are saved in the case of a power
cut or if the appliance is unplugged from the mains. The display is completely turned off during
this time. The back-up batteries are not included!
Back-up batteries are not essential for operation.
batteries-without connecting the appliance to the mains-is not possible.
The battery compartment is on the bottom of the alarm clock.
Setting up and connecting the alarm clock
1. Place the alarm clock on a solid and level surface.
2. Unfold the FM cable antenna completely. Attach the end as high as possible against a wall or
a shelf using sticky tape, for example.
Set time
Set and show alarm time
Pause alarm for approx. 5 minutes/ Press to show clock time
in radio play mode (not alarm activated )
Set sleep timer
Turn alarm function on/off
Stop alarm sounding
Set minutes
Set hours
First time use
1. Press the locking tab in the direction of the arrow and
remove the battery compartment lid.
2. Insert the batteries as illustrated. Ensure that the polarity is
correct (+/-).
Place the lid back on the battery compartment.
3.
8
Operation using solely