Technical Data - AEG KM8403001 User Manual

Problem
The display shows an error
code that is not in this table.
Steam and condensation
settle on the food and in the
cavity of the oven.
14.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

15. TECHNICAL DATA

15.1 Technical data
Voltage
Frequency
16. ENVIRONMENTAL CONCERNS
Recycle the materials with the symbol
Put the packaging in applicable
containers to recycle it. Help protect the
environment and human health and to
recycle waste of electrical and electronic
appliances. Do not dispose appliances
EURO Appliances - euappliances.info
Possible cause
There is an electrical fault.
You left the dish in the oven
for too long.
on the front frame of the appliance
cavity. Do not remove the rating plate
from the appliance cavity.
.........................................
.........................................
.........................................
220 - 240 V
50 Hz
marked with the symbol
.
household waste. Return the product to
your local recycling facility or contact
your municipal office.
*
ENGLISH
Remedy
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
with the
43