Table of Contents
Advertisement
®
WATER BOILER
Connect oil piping
General oil piping requirements:
burners must follow:
Equipment.
Equipment.
an anti-siphon device must be used to prevent flow
of oil in case of oil line break.
tubing to prevent breaking in case the tank settles.
22
— Boiler Manual
Recommended oil piping connection to burner (follow applicable code requirements and
burner manual for component locations)
Make swing joints so they will tighten as tank settles.
used on all threads.
vent oil leaking into ground or under floor. Check
fuel pump.
local codes for information.
Oil piping connection at burner:
burner, allowing burner mounting door to swing
open completely for servicing.
Do not use Teflon tape as an oil pipe seal-
ant. It can cause valves to fail, creating
Part number 550-141-986/0112
-
Advertisement
Table of Contents
