Philips HP6523 User Manual page 8

ENGLISH
8
2 Press the on/off button once to switch on the appliance.
The appliance starts to operate at speed II, which is the most
,
efficient speed for epilating.
Note: If you want to use speed I, press the on/off button a second time. Speed
I is suitable for areas with little hair growth, for hard-to-reach areas and for
areas where bones are located directly beneath the skin, such as knees and
ankles.
3 Place the epilating head at an angle of 90° onto the skin with the
on/off button pointing in the direction in which you are going to
move the appliance. Stretch the skin with your free hand if you are
not using the skin stretcher, this is to make the hairs stand upright.
Note: If you are using the skin stretcher, you do not need to stretch your skin
anymore. The skin stretcher also ensures that you keep the appliance on your
skin at the right angle. Make sure that the skin stretcher is in contact with your
skin as shown in the figure.
- Epilate your bikini line as shown in the figure.
- Epilate your underarms as shown in the figure.
4 Move the appliance slowly over the skin against the direction of the
hair growth while pressing it lightly.
5 Press the on/off button a third time to switch off the appliance.
6 Remove the double wavy massage attachment, the sensitive area cap
or the skin stretcher by pulling it off the appliance.
Tip: When you epilate your underarms in the shower, use a small amount of
your regular shower gel for better gliding.
Tip: To relax the skin, we advise you to apply a moisturising cream immediately
or a few hours after epilation. For the underarms, use a gentle deodorant
without alcohol.