Philips HP6523 User Manual page 10

ENGLISH
10
- Shave your bikini line as shown in the figure. Move the appliance in
different directions.
- Shave your underarms as shown in the figure. Move the appliance in
different directions.
7 When you have finished shaving, switch off the appliance and clean
the shaving head (see chapter 'Cleaning and maintenance').
Overheat protection
This function helps to prevent overheating of the appliance.
Note: To avoid overheating of the epilator, do not press the appliance too
hard onto your skin. The epilator works best when you move it over your skin
without exerting any pressure.
If the overheat protection is activated, the appliance switches off
automatically and the charging light flashes red for 30 seconds.
To reset the overheat protection, let the appliance cool down and then
switch it on again.
Note: If the charging light starts to flash red again, the appliance has not yet
cooled down completely.
Overload protection
If you press the epilating head too hard onto your skin or when the
epilating discs of the epilating head get blocked (e.g. by clothes etc.), the
appliance switches off and the charging light flashes red for 5 seconds.
Turn the epilating discs with your thumb until you can remove whatever is
blocking the epilating discs.
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
Always keep the adapter dry. Never rinse it under the tap or immerse it
in water.
Note: Make sure the appliance is switched off and unplugged before you start
to clean it.
- If necessary, clean the adapter with the cleaning brush or a dry cloth.
- After each wet use, clean the appliance thoroughly with water to
ensure optimum performance.