Oki C7000 Setup Manual page 19

15
USB Install: Macintosh
USB Port Connection
!
No USB interface cable is supplied with the printer.
Use a USB cable that is compatible with USB
specification 1.1.
Notes:
• Requires Mac OS 9.04 or higher
• Printer operation is not assured if another USB
compatible device is connected concurrently with it.
• If a USB hub is used, it must be connected directly to
the computer.
• Depending on the size of the document, if the memory
setting for the print monitor is low, you may not be able
to print in the background. To correct for this, increase
the memory setting for the print monitor.
• Depending on the model you have, you may need to
install updates to the operating system in order to use
USB: e.g., iMac Update 1.0, iMac Update 1.1, iMac
Firmware Update, etc. For further information, contact
Apple Computers.
□ Turn the computer and the printer off.
□ Connect the USB cable to the USB port on the
computer (1).
□ Connect the other end of the cable to the USB Port on
the printer (2).
USB: Install the Driver
!
Be sure to switch off antivirus software before
installing a printer driver.
□ Turn the printer on, then turn the computer on.
□ Place the CD supplied with the printer in the
CD-ROM drive.
□ Double-click the OKI CD icon that appears on the
desktop.
□ Open the MAC folder.
□ Double-click the Mac Installer icon, then click
Continue.
□ Select Custom Install from the drop-down box.
□ Select the printer model you have, then click Install.
□ When the installation is complete, click Quit.
USB: Create the Desktop
Printer
□ Double-click the Apple Extras folder on your local
hard drive.
□ Double-click the Apple LaserWriter Software
folder.
□ Double-click the Desktop Printer Utility icon.
□ Highlight Printer (USB) under Create Desktop.
□ In the drop-down box, select LaserWriter 8 and click
OK.
□ Under PostScript Printer Description (PPD) file,
click Change.
□ Make sure the "Printer Descriptions" folder is
selected in the drop-down box.
□ Highlight the OKI printer model you have from the
list, then click Select.
□ Under USB Printer Selection, click Change.
□ Highlight the OKI printer model you have, then click
OK.
□ Click Create.
The OKI printer icon appears on the desktop.
19