Sony DCR-PC2E Operating Instructions Manual page 83

Changing the menu settings
Icon/item Mode
CLOCK SET
DEMO MODE
z ON
OFF
WORLD TIME
BEEP z MELODY
NORMAL
OFF
COMMANDER z ON
OFF
DISPLAY z LCD
V-OUT/LCD
REC LAMP z ON
OFF
DV EDITING
(DCR-PC3E only)
Notes on DEMO MODE
•You cannot select DEMO MODE when a cassette is inserted in your camcorder.
•DEMO MODE is set to STBY (Standby) at the factory and the demonstration starts about 10 minutes
after you have set the POWER switch to CAMERA without a cassette inserted.
To cancel the demonstration, insert a cassette, set the POWER switch to other than CAMERA, or set
DEMO MODE to OFF.
•If you press the touch panel during the demonstration, the demonstration stops for a while, then it
starts again after about 10 minutes.
•When NIGHTSHOT is set to ON, the NIGHTSHOT indicator appears in the viewfinder or on the
LCD screen and you cannot select DEMO MODE in the menu settings.
Note
If you press DISPLAY/TOUCH PANEL with "DISPLAY" set to "V-OUT/LCD" in the menu settings,
the picture from a TV or VCR will not appear on the LCD screen even when your camcorder is
connected to outputs on the TV or VCR.
In more than 5 minutes after removing the power source
The "AUDIO MIX", "COMMANDER" and "HiFi SOUND" items are returned to their default settings.
The other menu items are held in memory even when the battery is removed.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the camcorder may
reflect on the subject if it is close. In this case, we recommend you set REC LAMP to OFF.
Meaning
To reset the date or time (p. 89)
To make the demonstration appear
To cancel the demonstration mode
To set the clock to the local time. Press r/R to set a
time difference. The clock changes by the time
difference you set here. If you set the time difference
to 0, the clock returns to the originally set time.
To output the melody when you start/stop
recording or when an unusual condition occurs on
your camcorder
To output the beep instead of the melody
To cancel the melody and beep sound
To activate the Remote Commander supplied with
your camcorder
To deactivate the Remote Commander to avoid
remote control misoperation caused by other VCR's
remote control
To show the display on the LCD screen and
viewfinder
To show the display on the TV screen, LCD screen
and viewfinder
To light up the camera recording lamp at the front of
your camcorder
To turn the camera recording lamp off so that the
subject is not aware of the recording
To duplicate the desired portion on a tape by simply
selecting the scenes to edit, using other equipment
connected with an i.LINK cable (DV connecting
cable) (p. 66)
POWER
switch
CAMERA
MEMORY
CAMERA
CAMERA
MEMORY
PLAYER
CAMERA
MEMORY
PLAYER
CAMERA
MEMORY
PLAYER
CAMERA
MEMORY
CAMERA
MEMORY
PLAYER
83