Note:
Item
Settings
FLASH
[EXECUTE]
INITIALIZE
Notes:
• Factory default settings are shown in bold.
• Menus/Items with a dagger (†) only appear when the Duplex Unit
is installed.
Item
X ADJUST
Y ADJUST
DUPLEX X
†
ADJUST
DUPLEX Y
†
ADJUST
Memory Menu
Factory default settings are shown in bold.
System Adjust Menu
Settings
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
C5100: Menu Functions • 82
(cont.)
Explanation
Initializes Resident Flash memory.
When ENTER is pressed, the
following message displays.
ARE YOU SURE?
YES=ENTER/NO=CANCEL
Press ENTER. The following
message displays:
EXECUTE NOW?
YES=ENTER/NO=CANCEL
Press ENTER, then turn the printer
off. The request to execute FLASH
initialization is put into the memory
and initialization is executed when the
power is turned back on.
Explanation
Adjusts overall print position
horizontally in 0.25
increments.
Adjusts overall print position
vertically in 0.25 increments.
Adjusts overall print position
of print face horizontally in
0.25 increments.
Adjusts overall print position
of print face vertically in 0.25
increments.