Table of Contents
Advertisement
TAM setting
Activating and deactivating call
screening
Go to ANS. MACH / SETTINGS / CALL SCREENING.
A screen indicating the function status appears.
•
To keep the current status, press Valid.
•
To change the status, press Edit
Valid.
.
Modifying the remote access code
The remote access code enables you to listen to the
messages left on your answering machine via another
telephone.
Go to ANS. MACH / SETTINGS / REMOTE CODE.
Press Yes
.
Enter your Base code (default setting is 0000). Press
Valid.
.
Enter the new remote access code (4 digits
mandatory). Press Valid.
Setting the message duration
This duration corresponds to the recording time that the
caller will have to leave you his message.
Go to ANS. MACH / SETTINGS / MESS. DURATION.
A screen indicating the maximum authorised recording
time for each message appears.
•
To keep the current duration, press Valid.
28
TAM setting
•
To modify the current duration, press Edit
Select the desired duration. Press Valid.
Privileged access
This service enables you to switch off the handset
ringer for all incoming calls when you do not want to be
.
disturbed, except for privileged calls.
, then
During the reception of a call, the answering machine
will switch on after a certain number of (muted) rings
that you will have set and the caller will be able to leave
you a message.
You can programme your telephone in such a way that
it will only ring when specific callers call. To achieve
this, they will need to dial
code when they hear the outgoing message. Once the
code has been entered, your telephone rings.
Go to ANS. MACH / SETTINGS / PRIV. ACCESS.
Press Edit
the screen.
Enter the privileged access code.
Press Valid.
.
Press Yes
Record mode
The record mode enables you to modify the recording
time capacity of the answering machine.
Two quality levels are available:
•
Superior quality: for a 15 minute high-quality
capacity.
.
•
Standard quality: for a 25 minute normal-quality
capacity.
.
(star) key and a privileged
to modify the information displayed on
.
to activate the privileged access mode.
.
Modifying the message recording quality
does not affect the quality of the outgoing
message.
Go to ANS. MACH / SETTINGS / RECORD MODE.
Press Edit
to modify the recording quality level
displayed on the screen. Press Valid.
Number of rings
Go to ANS. MACH / SETTINGS /
Press Edit
to modify the current number.
The Eco System mode automatically
determines: whether the answering
machine contains any new messages or
not; if it has no new messages, the number
of ring tones will be 4 and if has new
messages, number of ring tones will be 2.
.
NO OF RINGS.
Advertisement
Table of Contents
