Replacing The Belt Unit - Oki C C3200 User Manual

7. Finally, close the top cover and press down firmly at both
sides so that the cover latches closed.
NOTE
If you need to return or transport your printer for any reason,
please make sure you remove the image drum unit
beforehand and place in the bag provided. This is to avoid
toner spillage.
R
EPLACING THE BELT UNIT
The belt unit is located under the four image drums. This unit
requires replacement approximately every 50,000 pages.
Switch off the printer and allow the fuser to cool for about
10 minutes before opening the cover.
1. Press the cover release and open the printer's top cover
fully.
If the printer has been powered on, the fuser will be hot.
This area is clearly labelled. Do not touch.
WARNING!
Replacing consumable items> 62