Shading On Unprinted Sections - Oki C 3200n User Manual

Remedy
Change image drum.

Shading on unprinted sections

Possible cause
Paper has been
affected by static
electricity.
Paper is too thick.
Toner is low.
Toner rubs off when you rub the printed
surface.
Possible cause
Media Weight and
Media Type settings
may not be
appropriate.
Packing materials were
left on the fuser when
it was installed.
Remedy
Store paper within specified temperature and
humidity levels. See "Specifications" on
page 120.
Use recommended paper. See "Paper Weights"
on page 10.
Replace toner cartridge . See "Toner Cartridge"
on page 28.
Remedy
Set the value of media weight in the menu to
the next heaviest one (MEDIA MENU → YYY
MEDIA WEIGHT).
Careful! Fuser my be HOT!
Open the top cover and check to be sure that
all the packing materials were removed from
the fuser. To remove the fuser see "Fuser" on
page 51.
C3200n User's Guide
Troubleshooting • 111