Chicago Electric 61778 Owner's Manual & Safety Instructions page 5

5. Grip workpiece as lightly as possible (while still
keeping safe control of it). Let the tool do the work.
Specifications
Setup - Before Use:
Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Adjusting the Grinding Wheel
1. Turn the Adjustment Knob to the right
to raise the wheel. This will give you an
aggressive cutting action. This is also useful
when you are working with short bits.
Functions
power Switch
Item 61778
SAVE THESE INSTRUCTIONS.
Electrical Rating
Motor No Load Speed
Working Capacity
Drill Index
For technical questions, please call 1-888-866-5797.
6. To reduce vibration, maintain the tool as
explained in this manual. If any abnormal
vibration occurs, stop use immediately.
120VAC / 60Hz / 0.35A
1700 RPM
9/64" to 25/64" (3mm - 10mm)
2. Lower the wheel by turning the Knob to
the left. This is desirable when you wish
a finer ground edge, though it will take
longer and require more repetitions.
Adjusting Knob
Page 5