Setting your terminal
To configure the local network setting manually:
+
Choose
IP address
+
Enter the IP address of your terminal and press OK to confirm.
Sub-network mask
+
Enter the sub-network mask of your terminal and press OK to confirm.
Gateway address
+
Enter the IP address of the network gateway and press OK to confirm.
IEEE address (or Ethernet address) or MAC address
The Ethernet card of your terminal already has an unmodifiable, yet
consultable, IEEE address.
Netbios names
These names, which can be used with the network options, are used to
identify your terminal from a PC connected to a local network (for instance
with the name "IMP-NETWORK-1").
+
Enter the selected name (15 characters max) and press OK to confirm.
The WINS1 and WINS2 servers, used with the network options, allow access
to terminals on other sub-networks by means of their NetBIOS name.
2531 OK - SETUP / NETWORKS / LOCAL NETWORK /
CONFIGURATION
and press OK to confirm.
MANUAL
2532 OK - SETUP / NETWORKS / LOCAL NETWORK / IP
ADRESSE
2533 OK - SETUP / NETWORKS / LOCAL NETWORK / SUBNET
MASK.
2534 OK - SETUP / NETWORKS / LOCAL NETWORK /
GATEWAY
2535 OK - SETUP / NETWORKS / LOCAL NETWORK / IEEE
ADRESSE
2536 OK - SETUP / NETWORKS / LOCAL NETWORK /
NETBIOS 1
2537 OK - SETUP / NETWORKS / LOCAL NETWORK /
NETBIOS 2
51