Automatic Transmission - If Equipped; Manual Transmission - If Equipped - Chevrolet 2016 Cruze Getting To Know Manual

Traction Control and StabiliTrak Systems
The traction control system limits wheelspin
and the StabiliTrak® stability control system
assists with directional control of the vehicle
in difficult driving conditions. Both systems
turn on automatically every time the vehicle
is started. Turn off traction control if the
vehicle is stuck and rocking the vehicle is
required.
Press the Traction Control/StabiliTrak
Off button on the center console to turn
traction control on or off.
Automatic Transmission (If Equipped)
Driver Shift Control
Driver Shift Control is a manual mode that
allows the driver to select the range of gear
positions. This feature can be used when
driving on a downhill grade to provide engine
braking or to limit the top gear.
1. Move the shift lever left to the Low (L)
position.
2. Press the plus (+) button or minus (–)
button on top of the shift lever to increase
or decrease the available gear range.
The current gear will be displayed on the Driver Information Center. All gears below the
selected gear will be available. If vehicle speed is too high or too low for the requested
gear, the shift will not occur.
Manual Transmission (If Equipped)
Selecting Reverse
Before shifting into Reverse, completely stop the vehicle.
When selecting Reverse, press the button on the front of
the shift lever and then swiftly move the lever to the left
side of the gear pattern. Forcing the shift lever into gear
may damage the transmission.
18
See Driving and Operating in your Owner Manual.
See Driving and Operating in your Owner Manual.
See Driving and Operating in your Owner Manual.