Chevrolet 2016 Cruze Getting To Know Manual page 16

Cruise Control
Setting Cruise Control
1. Press the On/Off button. The
Control symbol will illuminate in white in
the instrument cluster.
2. When traveling at the desired speed, rotate
the SET– button down to set the speed.
The symbol will illuminate in green on the
instrument cluster.
Adjusting Cruise Control
RES+ Resume/Accelerate
Press to resume a set speed. When the system is active, press to increase speed.
SET– Set/Coast
When the system is active, press to decrease speed.
Cancel
Press to cancel the cruise control without erasing the set speed from memory. Pressing
the brake pedal or clutch pedal also will cancel the Cruise Control.
The Cruise Control set speed is erased when Cruise Control or the vehicle ignition is
turned off.
Parking Assistance Systems
Rear Vision Camera – When the vehicle is in Reverse, a view directly behind the vehicle is
displayed on the infotainment screen.
Note: The system may not display a clear image if dirt, snow or ice builds up on the camera lens. Clean
the lens, located above the rear license plate, with water and a soft cloth.
Rear Cross Traffic Alert
displaying a visual alert on the Rear Vision Camera display and sounding three beeps from
the left or right.
Rear Parking Assist
parking maneuvers, the system provides
"distance to closest object" information on
the Driver Information Center and sounds
a beep. Five beeps sound when an object is
very close.
To turn the Rear Parking Assist and Rear
Cross Traffic Alert systems on or off, press
Rear Parking Assist button on the
the
center console.
F
16
Optional equipment
F
– The system warns of traffic coming from either direction by
F
– During low-speed
F
Cruise
See Driving and Operating in your Owner Manual.
See Driving and Operating in your Owner Manual.