Step 6: Installing "Power Presenter Re Ii - Silvercrest SGT 10.6 A2 User Manual And Service Information

Step 6: Installing "Power Presenter RE II"

"Power Presenter RE II" is a simple program with which you can edit your presentations.
Proceed as follows to install "Power Presenter RE II":
1. Place the driver CD in your CD drive.
The installation wizard normally starts automatically. If it does not start automatically, proceed
as follows:

Open the Explorer (right-click on [Start]

Click the icon of your CD or DVD drive in My Computer.

Start the installation by double-clicking the "setup" file.
The installation dialogue box opens:
2. To install "Power Presenter RE II" click on [Power Presenter RE II (32 & 64 bit)] in the installation
dialogue box.
3. Follow the instructions of the installation wizard.
4. In the last dialogue box click [Finish].
The installation wizard is then closed. It is not necessary to restart your computer.
To start the program click on [Windows Start button]  "All Programs"  "Power Presenter RE II"
 "Power Presenter RE II". On the bottom edge of the screen you will find the following menu
bar, with icons for the respective commands.
You can familiarise yourself with the functions of the elements by hovering the mouse pointer over
the icons in the menu bar. After a short time a so-called "tooltip" then appears which provides
information on the function of each element. In most cases this information is sufficient to understand
the function of each element.
SilverCrest graphics tablet SGT 10.6 A2

"Explorer" menu).
English - 15