Vivotek IB8369A User Manual page 274

VIVOTEK
7.39 camera PTZ control (SD series)
Group: camctrl_c<0~(n-1)> for n channel products
capability_ptzenabled is 1)
n denotes the value of "capability_nvideoin" and k denotes the value of "capability_npreset"
NAME
ccdtype
motortype
cameraid
panspeed
tiltspeed
zoomspeed
autospeed
focusspeed
preset_i<0~(k-1)>_name
preset_i<0~(k-1)>_pan
preset_i<0~(k-1)>_tilt
preset_i<0~(k-1)>_zoom
274 - User's Manual
VALUE
string[16]
string[16]
1 ~ 255
-5 ~ 5
-5 ~ 5
-5 ~ 5
-5 ~ 5
-5 ~ 5
string[40]
capability_ptz_c<0~(n-1)
>_minpan ~
capability_ptz_c<0~(n-1)
>_maxpan
capability_ptz_c<0~(n-1)
>_mintilt ~
capability_ptz_c<0~(n-1)
>_maxtilt
capability_ptz_c<0~(n-1)
>_minzoom ~
capability_ptz_c<0~(n-1)
>_maxzoom
(the bit7 of capability_ptzenabled is 0 and the bit4 of
SECURITY DESCRIPTION
(get/set)
6/7 (Internal used, read only)
6/7 (Internal used, read only)
1/4 Camera ID controlling external PTZ
camera.
Note:
Please set your speed dome to the
appropriate baud rate, and Camera ID,
e.g. 2400bps, camera ID 1,2,3,,,,etc.
All Camera IDs on the same controlling
system (NVR or rs485 keyboard) have
to be distinct.
Therefore, once you send a controlling
signal, each camera will only accept the
inputs with the corresponding ID.
1/4 Pan speed
1/4 Tilt speed
1/4 Zoom speed
1/4 Auto pan speed
1/4 Auto focus speed
1/4 Name of the preset location.
1/4 Pan position at each preset location.
1/4 Tilt position at each preset location.
1/4 Zoom position at each preset location.