If You Need Service - Hotpoint REM29H Use And Care & Cooting Manual

Table of Contents

Advertisement

PROBLEM
OVEN WILL N~
COME ON
CONTROL PANEL
WILL N~ START
FOODS ARE EITHER
OVERCOOKED OR
UNDERCOOKED
ON DISPLAY
Steam or vapor escaping from
around the door.
Light reflection around door or
outer case.
If you need more help... call, toll free: GE Answer Ce]~ter@ / 8W.6262W / consumer information service

If You Need Service

on the back page of this book.
We're proud of our service and
want you to be pleased. If for some
reason you are not happy with the
service you receive, here are three
steps to follow for further help.
POSSIBLE CAUSE AND REMEDY
A fuse in your home may be blown or the circuit breaker tripped. Replace fuse or reset
circuit breaker.
Unplug your microwave oven, then plug it back in.
sure 3-prong plug on oven is fully inserted into wall receptacle.
Make
Door not securely closed.
START must be touched after entering cooking selection.
Another selection entered already in oven and CLEAR/OFF not touched to cancel it.
. Make sure you have entered cooking time after touching TIME COOK 1 &2.
CLEAR/OFF was touched accidentally. Reset cooking program and touch START.
Make sure you have entered a desired finished temperature after touching TEMP
COOK/HOLD.
Make sure you have entered a code number after touching AU~ ROAST.
Cooking times may vary because of starting food temperature, food density or amount
of foods in oven. Touch TIME COOK 1 & 2 and additional cooking time for completion.
. Incorrect power level entered. Check cooking guide for recommended power level or
changing levels during cooking.
Dish was not rotated, turned or stirred. Some dishes require specific instructions.
Check cooking
guide or recipe for instructions.
more than one food item. Check cooking guide time recommendations.
Roast functions. Check cooking guide for specific instructions.
. Probe has been forgotten or not seated properly in oven wall when
Temp Cook/Hold functions.
All these things are normal with your microwave oven:
Dimming oven light and change in
blower sound may occur while
operating at power levels other
than high.
is operating.
FIRST, contact the people who
serviced your appliance. Explain
why you are not pleased. In most
cases, this will solve the problem.
NEXT, if you are still not pleased,
write all the details-including
your phone number—to:
Manager, Consumer Relations
Appliance Park
Louisville, Kentucky 40225
Temp Cook/Hold or Auto
using Auto Roast or
might be noticed while using your
microwave oven. It's similar to the
interference caused by other small
appliances and does not indicate a
problem with your oven.
FINALLY, if your problem is still
not resolved, write:
Major Appliance
Consumer Action Panel
20 North Wacker Drive
Chicago, Illinois 60606

Advertisement

Table of Contents
loading

Table of Contents