Profi Cook PC-WC1047 Instruction Manual page 80

PROBLEM POSSIBLE CAUSE
The ventilation The temperature has been pro-
runs often or grammed to a very low tempera-
always. ture, or the difference between
the ambient and programmed
temperature is very large.
Water on the Is the temperature control set
bottom. properly?
Is the drain opening logged?
Interior lamp Is the plug not connected to the
does not work. mains?
Is the illuminant defect?
Note. On days of high humidity, condensation might occur on the outer surface of the
device. This is no malfunction; you may simply wipe the water off.
If a problem still persists after following the steps above, please contact your distribu-
tor and/or a technician.
P F
rODUct iche OF
eU D
accOrDinG
Brand
Model
Category
Energy efficiency class
A+++ (highest efficiency) to G (lowest efficiency).
Consumption data
Annual energy consumption
Net capacity cooling total
Net capacity freezing
3)
Star rating
Frost-free
Temperature rise time
Freezing capacity
h r
OUsehOlD eFriGeratOrs
irective (eU) 1060/2010
1)
2)
80
SOLUTION
Then it is normal that the ventila-
tor is running. It is not a malfunc-
tion.
Check the temperature settings.
Clean the drain opening with a
pipe cleaner or knitting needle.
Connect the plug properly to the
socket.
Contact a technician.
Proficook
PC-WC 1047
10
A
kWh 131.0
l 46
l -
-
-
h -
kg/24h -