Connecting The Smart Device To The Camera - Nikon COOLPIX 57000 Quick Start Manual

Connecting the Smart Device to the
Camera
1
Press the Z (Wi-Fi) button on the
camera.
The screen shown on the right is displayed.
If no connection confirmation is received
from the smart device within three minutes,
the message No access. is displayed and
the camera returns to the Wi-Fi options
screen.
You can also select Connect to smart
device in the Wi-Fi options menu to
display the screen shown on the right.
2
Set the Wi-Fi setting on the smart device to On.
Check the user's manual provided with your smart device for further details.
After the network names (SSIDs) that can be used for the smart device are
displayed, select the SSID displayed on the camera.
When Auth./encryp. is set to WPA2-PSK-AES in the Wi-Fi options menu,
the message for entering a password is displayed.
Enter the password that is displayed on the camera.
3
Start the "Wireless Mobile Utility" installed on the smart
device, while Negotiating... Please wait. is displayed on
the camera.
The screen for selecting "Take photos" or "View photos" is displayed.
When the message "Cannot connect to camera." is displayed, return to
step 1 and retry the procedure.
See "Installing the Software on the Smart Device" (A117).
C
Touching an NFC-compatible Smart Device to the Camera for a
Wi-Fi Connection
When you use a smart device that is compatible
with near field communication (NFC) functions and
runs on Android OS, you can establish a Wi-Fi
connection and start the "Wireless Mobile Utility" by
touching the NFC antenna on the smart device to
the Y (N-Mark) on the camera.
118
Connect to smart device
SSID:
XXXXXXXXXXXXXXXXXX
XXXXXX
Password:
XXXXXXXXXXXXXXXX
Cancel