Radio Operation - Sharp QT-CD250H Operation Manual

<P=005>

RADIO OPERATION

TUNER
MEMORY
1
2
3
Manual tuning:
Press the TUNING (
as required to adjust the frequency shown on the
display to the frequency of the desired station.
Auto tuning:
When the TUNING (
more than 0.5 seconds, scanning will start automat-
ically and the tuner will stop at the first receivable
broadcast station.
Downloaded From Disc-Player.com Sharp Manuals
REPEAT STOP
BAND TUNING
ON/STAND-BY REVIEW
(Function) PRESET
Tuning
Set the function switch to TUNER.
R
Press the REPEAT/BAND ( ) button to select
the desired frequency band. (FM ST, FM or AM)
FM STEREO
FM MONO
AM
R
To receive an FM stereo transmission, press the
REPEAT/BAND ( ) button so that the "ST" indi-
j
cator on the display lights up.
The " " indicator lights up when an FM broad-
cast is in stereo.
X W
Press the TUNING ( or ) button to tune into
the desired station.
X W
or ) button as many times
X W
or ) button is pressed for
QT-CD250H(SUK) TINSE0043SJZZ
PLAY / PAUSE
TUNING
/
PRESET
BAND
CUE
PRESET
Notes:
When radio interference occurs during auto scan
tuning, auto scan tuning may stop automatically
at that point.
If a weak station signal is found during auto scan
tuning, the station will be skipped.
W
To stop the auto tuning, press the TUNING (
or ) button again.
R
If the FM reception is poor, press the RE-
PEAT/BAND (
tor goes out.
Although the reception changes to monaural, the
sound becomes clearer.
Aerial adjustment:
FM
After use:
Set the ON/STAND-BY switch to STAND-BY.
8
TUNER
MEMORY
CLEAR
TUNING
/
PRESET
TUNING
X
) button so that the "ST" indica-
AM