Sanyo CDP-4100CR Instruction Manual page 9

Bass expander system
Set the BASSXPANDER switch to ON to
enhance the bass sound.
Auto power on function
The power turns on automatically when
PLAY/PAUSE button is pressed.
Auto power off function
The power turns off automatically after
about 1 minute when all tracks on a disc
have been played or when the STOP
button is pressed once to stop play.
Hold function
The HOLD switch disables the buttons
from operating to prevent play from start-
ing or stopping due to accidental opera-
tion. For normal use, leave the switch in
the off position.
To prevent battery drain:
Set the HOLD switch to the on position
when carrying the unit in a bag. The
PLAY/PAUSE button will not function
even if the button is pressed accidentally.
" " appears briefly on the
display.
To prevent play from being interrupted:
Set the HOLD switch to the on position
after starting play. "HOLD" appears.
If the operating buttons do not
function when pressed ...
1. Check whether the HOLD switch is
on or not.
2. Remove the batteries and/or dis-
connect the AC adaptor from the
unit. Wait a few seconds, then rein-
stall the batteries or reconnect the
AC adaptor.
3. If the buttons still do not function,
insert new batteries or charge the
rechargeable battery.
8