Midi Receive Channel Filter; Transmit Channel Selection - Yamaha PSS-680 PortaSound Authorized Product Manual

MIDI RECEIVE CHANNEL FILTER

Overview
This function allows you to choose on which of the 16 MIDI
channels the PortaSound will receive data in either MIDI
RECEIVE MODE, Keyboard Assign 00 or Sound Source
99. It also lets you determine whether the PSS-680 will be
controlled by external or internal clock data.
To select these reception channels individually for the two
modes, the corresponding RECEIVE MODE (00 or 99) must
be chosen before performing the following settings.
Operation
1. Press RECEIVE CH.
The TEMPO/PARAMETER & VALUE display will
change to
This display shows that channel 1 is selected for MIDI
reception.
A minus sign "–" in front of the displayed MIDI channel
number indicates that this channel is set to receive MIDI
data.
2. Turn this channel on or off with the VALUE buttons.
Pressing – causes the minus sign to disappear, meaning
that MIDI data will not be received on the displayed,
channel. Press + to turn it on again.
3. Use RECEIVE CH.
Each time you press RECEIVE CH .
switch to the next MIDI channel, starting again from
channel 1 after channel 16 (or
has been displayed.
As explained in step 2., you can turn the displayed channel
on or off with the VALUE buttons.
After channel 16 has been called up, pressing RE-
CEIVE CH. again displays a
(in 00 mode only). This parameter turns the external
clock reception on (indicated by a minus sign) or off
as shown in step 2., allowing you to switch between
internal and external clock control.
The PortaSound remembers these MIDI RECEIVE
CHANNEL SETTINGS even when power is turned
off.
36
to call up the other channels.
the display will
when in "00" mode)
for "clock"
At delivery, all channels are on for reception (corre-
sponds to OMNI mode). In mode 00, the external
clock is off.
TRANSMIT CHANNEL
Overview
This function allows you to select one MIDI channel for
transmission of "live" data (= the data of your current
manual performance) to external MIDI equipment.
Operation
1. Press TRANSMIT CH
This display shows that channel 1 is selected for MIDI
transmission.
The displayed MIDI channel number is the one currently
set to transmit MIDI data.
2. Set the MIDI channel with the VALUE buttons.
Pressing + raises the channel number while – lowers it.
(The display continues to change when 16 or 1 is reached.)
The TRANSMIT CH. number is memorized even
when power is turned off. The default value is 1.
Pressing TRANSMIT CH.
Bulk Dump mode, explained above. If you mistakenly
entered this mode, press TRANSMIT CH.
more to be able to select the transmission channel.
Selection
.
again enters Memory
once