Macintosh - Oki B410D Setup Manual

3 Click on the Device Options tab.
4 Click the Get Printer Settings bar. A list of
printer settings appears.
5 Click OK to activate the settings.
Activate Printer Options on a non-
Network Setup
1 Follow steps 1 to 3 above.
2 Check Lower Cassette.
3 Click OK to activate the settings.
Note: If optional memory is installed,
follow the installation instructions
provided with the memory card.
Configure Settings Using a Web
Browser (optional)
If you are working in a TCP/IP-enabled
environment, you can use a web browser to
display the printer or job printing status,
and to change settings on an embedded
web page.
1 Activate your web browser (Microsoft
®/
Explorer ™, Netscape Navigator™ 4.4
®
or higher, Mozilla , Firefox
2 Enter the IP Address for the printer.
(Locate the address on the Print Menu
Map in the Network Menu.
3 When the web page appears, select from
the categories in the menu list.

Macintosh

The printer drivers support OS 10.2.8 and
above.
Connect the cable
See "Computer Connection" on page 6.
Note: Printer operation is not assured if
Install the Printer Driver
1 Turn on the printer, then turn on the
2 Place CD in the CD-ROM drive.
3 Double-click the CD icon that appears on
4 Open the MAC folder.
5 Open the OSX folder.
6 Open the Driver Installer folder.
®
).
7 Open the Multilingual folder. The installer
8 Select PCL, or select PS (B430 only).
9 Follow the on-screen instructions.
Add the Printer
1 Run the Print Center or Print Setup
2 Click Add.
3 Click More Printers.
4 Browse to select OKI USB, OKI TCP/IP or
Note: If you are using USB, select OKI
5 Enter the printer's IP address (B410dn/
6 Quit the Print Center.
B400 Series Setup Guide
11
®
another USB compatible device is
connected concurrently with it.
computer.
the desktop.
will automatically install the language
selected in the OS.
Utility.
Bonjour from the drop-down menu.
USB and disregard step 3.
B420dn/B430dn models).