Table of Contents
Advertisement
1) Spraying your motorcycle with clean water after
finishing cleaning. Some remains of detergent may
eroded the alloy parts.
NOTE:
Clean the plastics with soft cloth clean the dirty
place several with clean water.
2) Start the engine and make it run for several
minutes after drying the motorcycle.
3) Before start the engine again, try the brakes
several times until the normal function can be
shown.
WARNING:
You'd better consider the distance for braking to
avoid danger after cleaning.
4) Add the lubricating oil to the drive chain after
cleaning and drying.
ALUMINUM TIRE MAINTENANCE:
The corrosion is caused when the aluminum tire
gets to rocky and mud road. You'd better clean and
dry it with soft cloth.
NOTE:
To avoid the unnecessary scar, never use the
abrasive detergent and polishing clean your tire.
STORAGE GUIDE
Extended storage, such as for winter, requires that
you take certain steps to reduce the affects of
deterioration from non-use of the motorcycle. In
addition necessary repairs should be made before
storing the motorcycle; otherwise these repairs may
be forgotten by the time the motorcycle is removed
from storage.
35
Advertisement
Table of Contents
