Table of Contents
Advertisement
There is a fuse box beside the storage cell. The entire
electrical appliance is protected by a fuse. Please
check the fuse first when your motorcycle is dead.
If the fuse has burned out, that may suggest the
electrical appliance is overloaded or short-circuit.
Please trust Zhenhua dealer for your repairing.
NOTE:
Turn the igniting button on "OFF" position before
changing or inspecting fuse.
WARNING!
Do not use other standard fuse, which may destroy
your engine and light.
TROUBLE-SHOOTING
If you can't start your engine, please check in as the
follows steps
1) There is not enough fuel in the tank
2) Whether the fuel has flows into carburetor from
fuel system.
3) If the last step has been verified, please check the
igniting system.
WARNING:
Do not make the fuel flow all ground, it should be
put into containers. Keep the fuel off the hot engine
and exhausting pipe. Keep away from fire or fire
source or hot source while performing the test.
1) Remove the spark plug and connect high-tension
lines.
2) Fasten the spark plug on the motorcycle. Turn the
ignition switch on "ON" position and press down the
button to start it. If the ignition works well, there will
be sparks between spark plug play. If there is no
spark please contact Zhenhua authority repair station.
33
Advertisement
Table of Contents
