Light Changing; Fuse - PACIFIC RIM INT’L WEST PST150-18 Manual

Table of Contents

Advertisement

the traction, stability, steering and operating system.
A new front tire should be replaced when the depth
of thread is decreased below 1.6 mm.
A new rear tire should be replaced when the depth of
thread is decreased below 2 mm.
WARNING:
The standard of your tires is as follows:
Front tire: 130/60-13 M/C Rear tire: 205/50-10
Improper tires will cause danger, so we strongly
recommend you choose the tire from Zhenhua dealer.
Tire inflation pressure and the general tire condition
are extremely important to the proper performance
and a safety of the vehicle. Check your tires
frequently for both wear and inflation pressure.
Replace the tire as per following stipulation.
RENEWAL OF LIGHT:
When changing a burned bulb, the same power
bulb should be meeting. If use the improper bulb, the
whole electrical appliance may be destroyed and the
burn will burn out. "The specification "and
"electrical appliance" will give you more
information for your consideration.
WARINING:
When the bulb is very hot in "ON" position, this
condition will last for a short time after the button
was turn off. So the bulb should be cooled down
before operating.
NOTE:
Turn the igniting on "OFF" position when
changing the bulb.
Check in again after finishing the bulb changing to
make sure the new bulb can work well.

FUSE:

32

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pst150-7

Table of Contents