Using Options Menu - Philips 55PFL7900 User Manual

Using Options menu

You can access to some TV settings directly by using
1
Press OPTIONS to display options menu, then press OK.
2
Use to Select a desired setting, then press OK.
Options
a b
Options
Following settings can be configured.
To choose the Closed captions display setting.
Closed captions
Closed captions
To Select the language according to your
preference.
Digital audio
(It differs depending on the program.)
language
Digital audio language
To Select an audio format.
Mono/Stereo
Mono/Stereo
Controls
If you have our brand products such as Blu-ray disc player or DVD
recorder that are compatible with EasyLink functions, connect them
to this unit via an HDMI cable so you can simply operate various items
from this unit's Remote Control.
B B efore you begin:
select a device connected to an HDMI connection.
You must set On in Master EasyLink.
Otherwise, LINK does not work even if you connected our brand
devices to this unit.
1
Press OPTIONS to display options menu.
2
Use to Select Controls then press OK.
3
Use to Select the desired item, then press OK.
Controls the menu of your connected EasyLink
Device-menu
device.
Controls the top menu of your DVD or Blu-ray
Device-contents
discs.
Controls the pop-up menu of your Blu-ray discs.
Device-favorite
Note(s)
•
Some of EasyLink functions may not be available depending on your EasyLink devices or
discs.
•
You must connect this unit to our brand EasyLink devices and be sure its EasyLink (HDMI CEC)
setting is also set to On.
•
We do not guarantee 100% interoperability with other brands of HDMI link compliant devices.
OPTIONS.
c d
p. 33
p. 39
p. 39
p. 22
p. 36
Picture and sound
Following settings can be configured.
To set predefined picture mode.
Auto picture
p. 30
Picture
To set predefined sound mode.
Auto sound
p. 32
Sound
To adjust headphone volume.
Headphone
p. 32
volume
Sound
To Select the audio output from the unit's
speakers or not.
TV speakers
p. 32
Sound
To switch the TV aspect ratio.
Picture format
Changing Picture Format
Setup To display setup menu.
ECO settings
Following settings can be configured.
You can turn off the unit automatically when there
is no operation for specified time. In spite of this
setting, the unit goes into standby mode
automatically if there is no signal input and no user
operation for 15 minutes.
Press repeatedly to change the amount of time
Switch off timer
(increases the time by 30 minutes up to 240
minutes).
Each press of
minutes.
To cancel the timer, press
displayed.
To set light sensor On or off.
Light sensor
p. 30
Picture
25
.
p. 23
will decrease the time by 30
repeatedly until "0" is
Continued on next page.
English