Installing The Stands; Lifting The Tv Set; Removing Cardboard - Philips 55PFL7900 User Manual

Installing the Stands

You must Support the top of the TV set at all times to prevent the TV from
falling.
1
Remove one of the bottom polystyrene foam bases.
2
Rip the plastic bag until the bottom corner of the TV is exposed.
3
Remove the protective film on the bottom of the TV and fasten the
matching stand to the TV with 3 screws (included).
4
Remove the other bottom polystyrene foam base and rip the plastic
bag on this side as shown in step 2.
3 screws
required
5
Fasten the other stand to the TV with 3 screws.
•
Both stands should now be securely fastened.
3 screws
required
Note(s)
•
A wide open space is recommended for assembly.
•
A Phillips-head screwdriver is required to fasten the stands to the TV set.
•
When attaching the Stand, ensure that All Screws are tightly fastened. If the Stand is not properly
attached, it could cause the Unit to fall, resulting in injuries as well as damage to the Unit.
•
To remove the Stand from this Unit, unscrew the Phillips-head screws by reversing the
procedure. Be careful not to drop the Stand when you remove it.

Lifting the TV Set

Carefully lift the TV set as shown in the illustration and place it onto a
stable, level surface.

Removing Cardboard

Remove the cardboard attached to the screen. You are now ready to set
up and enjoy your Philips TV.
10
.
English
Continued on next page.