Watching Channels From An External Device; Access The Home Menu - Philips 55PFL7900 User Manual

Watching Channels from an External
Device
Switching Each Input Mode can easily switch with the Remote Control
between TV and external devices when they are connected to the unit.
1
Turn On the Set-top Box or the Connected Device.
Press SOURCE and use
Connected Device and wait a few seconds till the Picture appears.
Watch TV HDMI1
Use the Remote Control of the Set-top Box or the Connected
Device to Select Channels.

Access the Home menu

1
Press .
Guide to Home menu
Source Home
Watch TV
Network
: Switches back to the TV Source if another Source
Watch TV
is selected.
: To Select Connected devices.
Source
Home Network : Accesses Home Network Menus.
: Accesses Net TV Menus.
Net TV
: Accesses Miracast Menus.
Miracast
Setup : Accesses Menus that allow you to change Picture,
Sound and other TV Settings.
to Select the Set-top Box or the
HDMI2 HDMI3 Video
Net TV Miracast Setup
Lock or unlock your device from the Home menu
This section describes how to lock or unlock specified device.
1
Press SOURCE on the Remote Control.
2
Use to Select a device to lock or unlock.
3
Press OPTIONS on the Remote Control.
4
Use to Select Lock or Unlock, then press OK.
•
If device lock is unlocked, Lock will be displayed. If device lock is
locked, Unlock will be displayed at the top right of the device
icons.
5
Enter your PIN. Change PIN
•
Once you have set PIN, PIN input menu does not appear after the
unit is Turned on.
Changing device type
You can change device icons displayed in the source list.
1
Press SOURCE on the Remote Control.
2
Use to Select the desired device.
3
Press red button on the Remote Control.
4
Use to Select the desired type, then press OK.
To reset the type
•
Press OPTIONS on the Remote Control at step 3, then select Original
icon.
Scan connections
You can rescan TV connections and update the source list.
Before you begin:
You must set On in Master EasyLink.
1
Press SOURCE on the Remote Control.
2
Use to move the cursor to any device.
3
Press OPTIONS on the Remote Control.
4
Use to Select Scan connections, then press OK.
22
p. 39
p. 36
Continued on next page.
.
English