Serial Interface; Pc Cards - Mitsubishi Electric Apricot AL Series Owner's Handbook Manual

Serial interface

Problem
Serial device does not work

PC cards

Problem
PC card does not work
Possible solutions


Check the cable connection.


Check that the Setup settings are correct. Refer to Chapter 7, BIOS
Setup and the Setup utility itself.


Check that required device drivers are installed.
Possible solutions


Check that the card is fitted properly. Refer to Chapter 6, Upgrading.


If the PC card requires an external cable e.g. for connection to
telephone line, check that this is connected correctly. Refer to the
documentation which came with the PC card.


Check that the PC card device driver software is properly installed.
Again, refer to the relevant documentation.


In general, Suspend mode should not be used with Type II
(communications) PC cards, as it affects the remote connection. If
Suspend mode has been activated, this may cause a PC card to operate
incorrectly. Restart the computer.
OWNER'S HANDBOOK
T r o u b l e s h o o t i n g 8 / 5