Table of Contents
Advertisement
OWNER'S HANDBOOK
Checking the AC power supply
When this product is delivered, it is ready for the
commercial AC power supply generally available in
the country in which it is first sold. It is supplied with
an AC power cord and plug which comply with the
relevant safety standards.
Before using the product in a country other than that in
which it was originally sold, you must check the voltage
and frequency of that country's AC power supply, and
the type of power cord required there. Check the power
rating labels on the bottom of the computer to ensure
that they are compatible with the AC power supply.
Connecting to the AC power supply
Important
Any peripheral equipment that requires an AC power
cord must be earthed.
Use the following guidance to connect the
components together. It is important that you take
each step in the order indicated.
6
S a f e t y & r e g u l a t o r y n o t i c e s
1.
Before connecting any components, ensure that
the AC power supply is switched off or
disconnected, and that the system unit, and any
peripherals are turned off.
2.
Where appropriate, connect the computer to the
network.
3.
Connect the component power cords: system
unit plus any other peripherals to nearby,
grounded AC power outlets. (Never substitute a
power cord from any other appliance). Then
switch on or connect the AC power supply.
4.
Turn on the system unit first then any other
peripherals.
Power Cable Connections - UK ONLY
This product is supplied with an AC power unit that
has a non-removable moulded plug.
Always replace the fuse with one of the same type and
rating which is BSI or ASTA approved to BS1362.
Always refit the fuse cover, never use the plug with the
fuse cover omitted.
Advertisement
Table of Contents
