Satellite System
"
Availability depends on the specific model and area.
Broadcasting
Channel Settings
>
A set of satellite dish settings must be configured for each wanted satellite before performing a
channel scan.
Satellite System
is available when
the PIN.
Satellite
Selection: You can choose the satellites for this TV.
●
LNB
Power: Enables or disables the power supply for the LNB.
●
LNB
Settings: Configures the outdoor equipment.
●
Satellite: Selects the satellite for receiving digital broadcasts.
Transponder: Selects a transponder from the list or adds a new transponder.
DiSEqC
Mode: Selects DiSEqC mode for the selected LNB.
Lower LNB
Oscillators: Sets the LNB oscillators to a lower frequency.
Upper LNB
Oscillators: Sets the LNB oscillators to a higher frequency.
Tone 22
kHz: Selects the Tone 22 kHz depending on the LNB type. For a universal LNB it should
be Auto.
Satellite System
>
Try Now
Aerial
is set to Satellite. When the PIN input screen appears, enter
Try Now
Try Now