Enabling The Sound (Additional Settings) - Samsung UE55H7005 E-Manual

Sound Speaker Settings
>
Set the configuration of the network speaker(s) you connected to the TV.
"
Audio and visual sync mismatches may occur, depending on the model.
"
Network speakers can disconnect depending on the network environment.
"
While playing the
Settings
●
Multiroom Link
–
Multiroom: Configure the network speakers so that all play the same, combined audio.
Channels are ignored.
SoundBar+Surround: If you have connected a Sound Bar, set
speakers. The Sound Bar already includes the Center and Front Left and Right channels.
"
Activating
Volume Level
–
Adjust the volume of each speaker individually or all speakers at once.
Speaker Test
–
Send a test sound to each speaker to make sure your system is working properly.
Edit Name
–
You can give each speaker a name.

Enabling the Sound (Additional Settings)

Sound Additional Settings
>
Configure additional settings for optimum audio output.
DTV Audio Level
●
(Digital channels only)
The TV cannot freely control the volume of the digital audio that it sends to the AV receiver. Use
this to set the digital audio volume at a comfortable level.
"
According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB.
"
To increase or decrease the volume, adjust between the range 0 and -10 respectively.
Audio Format,
●
This Smart TV is SPDIF-enabled. The Sony Philips Digital Interface (SPDIF) provides digital audio
output to speakers and various digital devices, including A/V Receivers and home theatres.
Audio Format
Selects the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF)
formats may vary depending on the input source.
TV Speaker
>
Multi-Link Screen, you can hear the selected audio.
Screen Mirroring
Settings - Additional
Try Now
Try Now
Audio Delay
Try Now
Multiroom Link
>
Multiroom Link.
disables
SoundBar+Surround
to rear