Sennheiser UI 765 Instruction Manual page 8

Connecting the headset to the UI 765
A Connect the RJ11 4/4 plug of the adapter cable to the
HEADSET socket until it locks in place.
Connecting the dictaphone to the UI 765
B Connect the 3.5 mm jack plug of the dictaphone con-
necting cable to the
front side until it locks in place. Connect the 3.5 mm jack
plugs to the outputs of your dictaphone device.
Connecting the handset to the UI 765
C Pull the RJ11 4/4 plug of the handset cable out of the
telephone and connect it to the
locks in place.
Connecting the telephone to the UI 765
D Connect one of the two RJ11 4/4 plugs of the supplied
telephone connecting cable to the
it locks in place. Connect the second RJ11 4/4 plug to
the handset socket on your telephone.
4
DICTAPHONE socket at the UI 765
HANDSET socket until it
PHONE socket until