Changing The Motor Protection Filter; Changing The Hepa Filter - Fakir ARES Instructions For Use Manual

GB
Changing the motor protec-
tion filter
Changing the HEPA-filter
36
Reinigung und Wartung AFTER USE
1. Open the dust compartment lid.
2. Remove the contaminated filter and put in the new one
perfectly.
3. Close the dust compartment lid (both housing parts)
until it clicks into place.
NOTICE!
Change the motor protection filter after the consumption of
approx. 5 dust bags.
1. Open the accessory compartment lid.
2. Press the flaps down and remove the exhaust air grid
backwards.
3. Remove the contaminated HEPA filter and dispose it.
4. First put in the new HEPA filter and then insert the
exhaust air grid so that it fits precisely.
5. Close the accessory compartment lid.
NOTICE!
Change the HEPA filter after approx. 6 months.
The HEPA* filter is a high efficiency submicron air filter
which not only collects household dust but also pollen
and other micro-small particles – a boon for people with
sensitive respiratory organs or those suffering from all-
ergies.
* HEPA = H
IGH
E P
FFICIENCY ARTICULATE
A
IR FILTER