Autostart Recording From External Cd Player Cd-Sync - Philips CDR775 Instructions For Use Manual

RECORDING
DISC.
Autostart recording from external CD player
CD-SYNC
OPEN / CLOSE
OPEN / CLOSE PLAY / PAUSE
PLAY / PAUSE
The CD-SYNC feature enables you to make fast and easy
recordings of a CD. Track increments are automatically
detected from the source material. Track increments cannot
be added manually. In analog source material a silence of 2.7
seconds or more is automatically detected as a track
increment.
Preparing for autostart recording
1 Make sure the disc is absolutely free of scratches and dust
particles.
2 Press EXT(ernal) SOURCE repeatedly until (depending on the
digital connection used):
DIGITAL I, OPTICAL I or ANALOG lights up and
DIGITAL 1, OPTICAL or ANALOG appears on the
display.
REM REC
SYNC MANUAL
DIGITAL I
OPTICAL I
ANALOG
3 With the CD recorder stopped, press REC TYPE four times:
if you wish to record a complete disc or program.
d and
SYNC
EXT DISCand WAIT followed by the track number,
the total remaining time and START SOURCE.
REM REC
SYNC MANUAL
DIGITAL I
OPTICAL I
ANALOG
• If input label (DIGITAL I) flashes, the digital connection is
incorrect.
Start autostart recording
1 To start recording, press PLAY on the selected source.
The CD recorder automatically starts to record and d
lights continuously. The track number and track time
appear on the display.
20
Downloaded From Disc-Player.com Philips Manuals
REC
STOP STOP
RECORD EXT
TYPE
FINALIZE
ERASE
SOURCE
RW
ANALOG
CDR 77X AUDIO CD RECOR
DER
PROG
SHUFFL E
DISPLAY SCROLL REPEAT DJ MODE
TIME TRACK TOTAL REM TRACK TIME
RECORD
PROG
SHUFFLE
CD CHANGER CD
REPEAT
RW RW
SCAN
start to flash and the display shows REC
TOTAL REM TRACK TIME
TIME TRACK
RECORD
PROG
SHUFFLE
CHANGER
CD CD
REPEAT
RW RW
SCAN
• If, however, you start the source during a track, CD-SYNC
recording starts at the beginning of the next track or after
2.7 seconds of silence in analog recordings.
• To check the remaining recording time on the CDR(W), press
DISPLAY. (This can also be done during recording.)
• The EASY JOG/ENTER key can be used to adjust the
recording level.
PHONES
• The recorder stops automatically.
2 To stop recording manually, press STOP on the CD recorder.
UPDATE lights up and
• If STOP 9 was pressed within 3 seconds after pressing
PLAY, no recording will take place.
• To interrupt recording, press PAUSE on the CD recorder.
d starts to flash. (Autostart recording is disabled.) To
resume, press RECORD on the CD recorder.
After recording the display will show UPDATE for several
seconds.
Note:
- Recordings from DAT, DCC or analog sources will only stop
after 20 seconds silence.
- Auto track is always active.
STEP
Important:
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
ALL
finalizing discs.
TRACK
Finalized CDRW discs play only on CDRW compatible
CD players.
For recording from CD changers always use REC EXT
DISC.
STEP
ALL
TRACK
and d go out.
SYNC