Listen Mode Recording From Internal Cd Player - Philips CDR775 Instructions For Use Manual

RECORDING

Listen mode recording from internal CD player

OPEN / CLOSE
OPEN / CLOSE PLAY / PAUSE
PLAY / PAUSE
STOP STOP
During Listen mode recording you listen to the recording
while you are making it.
Preparing for Listen mode recording
1 Make sure that the recording disc is absolutely free of
scratches and dust particles.
2 For recording, press REC TYPE twice:
The display first shows the selection.
The fRECORDg label starts blinking. After 3 seconds
the display shows the remaining CDR(W) recording time
on the left and total time of source on the right. (every 2
seconds PRESS RECORD is displayed) The left
selection indicator is lit.
REM REC
SYNC MANUAL
DIGITAL I
OPTICAL I
ANALOG
REM REC
SYNC MANUAL
DIGITAL I
OPTICAL I
ANALOG
REM REC
SYNC MANUAL
DIGITAL I
OPTICAL I
ANALOG
• If DOES NOT FIT appears on the display, there is not
enough recording space left on the CDR(W) disc.
You can press RECORD: only complete tracks that still fit on
the CDR(W) will recorded.
or
You can press PROG to select one or more tracks for
recording (see programming):
- rotate the EASY JOG/ENTER key to the required track
number, then press the key (or ENTER on the remote
control)
18
Downloaded From Disc-Player.com Philips Manuals
EASY JOG
STORE/ CANCEL/
MENU DELETE
ENTER
REC
RECORD EXT
TYPE
FINALIZE
ERASE
SOURCE
RW
ANALOG
CDR 77X AUDIO CD RECOR
DER
PROG
PHONES
SHUFFL E
DISPLAY
SCROLL REPEAT DJ MODE
TIME TRACK TOTAL REM TRACK TIME
RECORD
PROG
SHUFFLE
CHANGER
CD CD
REPEAT
RW RW
SCAN
TRACK TIME
TIME TRACK TOTAL REM
RECORD
PROG
SHUFFLE
CHANGER
CD CD
REPEAT
RW RW
SCAN
TIME TRACK TOTAL REM TRACK TIME
RECORD
PROG
SHUFFLE
CHANGER
CD CD
REPEAT
RW RW
SCAN
or
- directly select the track number via the 10-keypad on the
remote control then press the ENTER key to confirm your
selection and go to the next step.
3 Play the source first to set the optimal recording level on
the CD recorder.
4 Rotate the EASY JOG/ENTER key until, on the Record/Play
Level bar, all the blue segments are alight, but the red
segments do not light continuously during the loudest
passages.
Display shows _XX DB (Decibel, e.g. -3DB).
5 Stop the source.
Start Listen mode recording
1 To start recording, press RECORD.
WAIT lights up. fRECORDg lights continuously and
the selected track or program is copied at normal speed.
The track number and the recording time left will appear.
• To check the track time, press DISPLAY. This can be done
during recording.
• Recording will stop automatically.
Note: Copy prohibited tracks will be copied analog. ANALOG
REC is displayed.
2 To stop recording, press STOP.
STEP
UPDATE lights up, fRECORDg goes out and
recording stops. (Minimal track length must be 4 seconds
ALL
TRACK
otherwise silence will be added to the track.)
• If STOP was pressed within 3 seconds after RECORD, no
STEP
recording will take place.
After recording, the display shows UPDATE for several
ALL
TRACK
seconds. The Total time indications can differ slightly.
However, no music information is lost.
STEP
Note: In this Recording mode, the Pause function is not
operative.
ALL
Important:
TRACK
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
finalizing discs.
Finalized CDRW discs play only on CDRW compatible
CD players.