Adjusting The Touchpad; Show Status And Notification Banner; Recommendations; History - Samsung S9CDVBEUF E-Manual

Adjusting the Touchpad

Screen Menu > System
Now
Users can adjust the sensitivity of the Smart Touch Control's touchpad. Set
sensitivity and make it more convenient to use.

Show Status and Notification Banner

MORE
Press the button on the Smart Touch Control and then select
panel to display the status and notification banner at the top of the screen. Refer to the "Status and
Notification" banner for more information.

Recommendations

RECOMM. / SEARCH
Press the
bottom of the screen.
This shows the current / scheduled programme and application recommendations.
Select a programme that is currently airing to jump to the corresponding channel or a programme
that is scheduled to air to set up a Schedule Viewing or Schedule Recording setting. Refer to the
"Scheduled Recommended Programme Info" for more information.
Select an application to launch. Samsung Apps will launch if the selected application is not installed
on the TV. For more information, see "Samsung Apps".

History

RECOMM. / SEARCH
Press the
of the screen. This displays an interactive list of recently accessed channels, media content and
applications.
"
RECOMM. / SEARCH
The
region.

Deleting History Data

Screen Menu > Smart Features
You can delete the history information about recently viewed channels, content and applications.

Searching

RECOMM. / SEARCH
Press the
the screen. Press the
search criteria to search not only many apps and their contents on the TV but also the Web. This
button toggles between
Device Manager
>
button and then select
button and then select
button may function as a
Clear viewing history
>
button on the Smart Touch Control. The list appears at the bottom of
RECOMM. / SEARCH
Recommended and Search.
Smart Touch Control Settings
>
Recommended
History
from the list displayed at the bottom
History
recall feature, depending on your country or
History
>
button again. The keypad will appear on the screen. Enter
Touch Sensitivity
>
Touch Sensitivity
STATUS
on the virtual control
from the list displayed at the
Try
to adjust